Facts It’s Important To Be Informed On SA-1 Carbide Burrs
SA-1 cylinder shape burrs are perfect for interior contour work and deburring. Due to the extreme hardness of the tungsten carbide, it can be used on considerably more demanding jobs than HSS (High-Speed Steel). These carbide burrs are constructed with tungsten carbide burr die grinder bits and may begin to soften at higher temperatures, so carbide is obviously the best option for long-term performance.
Double cut or Cross cut carbide burrs tend to be suited for ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials such as stone, plastics, wood floor, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut on account of producing smaller chips as they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and will see you through most applications.
Cut – Double Cut
Max RPM – 70,000, yet it is uncommon to need a lot more than 35,000 RPM.
Machines Applied to:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined through the material you are using your burr on. If you happen to be experiencing chipping, you are most likely operating at too much of speed for your application. Start with a slower speed and increase in the process and soon you reach the greatest results
Apply light pressure and allow the tool carry out the work. Bearing documented on the tool will lead to reduced tool life along with a dull burr.
Always wear proper PPE to add (and not restricted to) safety glasses, hearing protection, respirator, and work gloves. Keep all guards available in your machine.
Avoid experience electrical power drills; the slower speeds can lead to chipping of your workpiece.
For details about SA-1 Carbide Burrs you can check this internet page