Information You Should Be Aware Of SB-3 Carbide Burr Die Grinder Bit
Use tungsten carbide burrs on hard materials including steel, aluminum and surefire, all sorts of stone, ceramic, porcelain, wood, acrylics, fibreglass and reinforced plastics. When suited for soft metals for example gold, platinum and silver, carbide burrs are fantastic because they last for years with no breaking or chipping.
Different cuts of carbide burrs will probably be suitable for many materials.
Uses of SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools for example die grinders, pneumatic rotary tools and high speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools say for example a Dremel.
Carbide burrs are trusted for metalworking, tool making, engineering, model engineering, wood carving, creating jewelry, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are utilized inside the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut if you choose?
Single cut (one flute) carbide burrs use a right handed (up cut) spiral flute. Single cut is utilized with metal, hardened steel, copper, iron and ferrous metals and can remove material quickly using a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removing material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel and also for all non-metal materials for example stone, plastics, wood and ceramic. This cut has more cutting edges and will remove material faster. Double cut also known as Diamond Cut or Cross Cut (2 flutes cut across each other) and will leave a smoother finish than single cut because of producing smaller chips because they cut away the information. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are most popular and work with most applications.
Medium- light elimination of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed if you work with?
The velocity of which you use your carbide burr with your rotary tool depends on the pad you’re using it on and also the contour being produced but it’s safe to assume you don’t need greater than 35,000 RPM. When the burs are chipping easily this might be because of the speed being too slow. It’s ideal to begin the bur off slow, increasing the speed as you go along. High speeds prevents clogging inside the flutes of one’s carbide burs.
As with all drill bits and burrs, allow burr perform the work and apply only a little pressure, otherwise the cutting edges from the flutes will chip away or become smooth too quickly, minimizing the lifetime of your burr.
For additional information about SB-3 Carbide Burrs check our website