Details It Is Important To Find Out About SA-1 Carbide Burrs
SA-1 cylinder shape burrs are ideal for interior contour work and deburring. Because of the extreme hardness of this tungsten carbide, technology-not only on much more demanding jobs than HSS (High-Speed Steel). These carbide burrs are made of tungsten carbide burr die grinder bits and can learn to soften at higher temperatures, so carbide is definitely a good choice for long-term performance.
Double cut or Cross cut carbide burrs are usually suited for ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials for example stone, plastics, hard wood, and ceramic. Double cut burrs will leave a somewhat smoother finish than single cut on account of producing smaller chips while they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is easily the most popular cut and can look at you through most applications.
Cut – Double Cut
Max RPM – 70,000, yet it’s uncommon to want over 35,000 RPM.
Machines Suited for:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Surefire, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined through the material you’re using your burr on. If you are experiencing chipping, you’re operating at too much of speed for that application. Start which has a slower speed and increase during this process before you get the ideal results
Apply light pressure and permit the tool do the work. Bearing down on the tool will lead to reduced tool life and a dull burr.
Always wear proper PPE to include (but not restricted to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards in position in your machine.
Avoid use on electric power drills; the slower speeds can lead to chipping of your workpiece.
For more details about SA-1 Carbide Burrs go to our web site