Specifics It Is Important To Understand About Sa-3 Cylinder Shape Premium Tungsten Carbide Burr

SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Due to extreme hardness of this tungsten carbide, you can use it on much more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs tend to be utilized on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, wood, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut on account of producing smaller chips as they cut away the material. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and definately will help you through most applications.

Machines Applied to:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed will be determined with the material you use your burr on. If you might be experiencing chipping, you are most probably operating at excessive of speed to the application. Start using a slower speed while increasing as you go along unless you get the best results

Apply light pressure and let the tool carry out the work. Bearing documented on the tool will result in reduced tool life plus a dull burr.

Always wear proper PPE to add (but not limited to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards set up on the machine.

Avoid experience electric power drills; the slower speeds may lead to chipping of one’s workpiece.
For more info about SA-3 Carbide Burrs take a look at our new resource