Archive September 2017

The best way to Increase your Band Score in IELTS Speaking Module

Many IELTS enrollees tend to be dissatisfied using performance in IELTS speaking module. There is various reasons behind this. It is extremely disappointing if you should leave the IELTS interviewer’s cabin having a long face despite spending so much time almost all the time to improve your grip over English language. However, it’s not necessary to take this unfortunate issue on your heart. You can actually get through your IELTS speaking test with a little more effort and also by using following points into your considerations.

1. How you can represent yourself:
Never forget the golden rule “First impression could be the last impression”. There’s hardly anyone would you not have in mind the value of this expression. However, some test takers often overlook this simple thought. Suppose you’re just about to penetrate the interviewer’s room or cabin, tend not to rush inside immediately. Firstly, gently knock with the door and politely seek the permission to visit inside by saying, “Excuse me, sir/madam. May I appear in? “. This is actually the most polite method of disturbing the examiner who could possibly be busy in evaluating the speaking performance in the previous candidate. Once you are granted the permission, enter the room/cabin without having to leave the door ajar. Secondly, whenever you approach the interviewer, wish the examiner which has a smile on the face. You must stand at the front of the interviewer’s desk as an alternative to both sides of him/her, so you mustn’t sit if you aren’t motivated to take the seat with the examiner. When you are motivated to sit do not forget to give you a prompt reply, “Thank you sir/madam.”

Similarly, there’s also many other factors that you need to take into your account while near the interviewer. By way of example, sitting posture, you must not rest your arms on desk, since it is mainly for the examiner’s purposes. Its also wise to make certain you are sitting together with your straight back instead of leaning up against the table.

The subsequent important think that will make your speaking more interactive and natural will be your facial expressions. Do not allow to drift any symbol of nervousness in your face or show too little confidence in your soul. These pessimistic expressions can have a negative effect on your interviewer, that may ultimately affect your general band score in speaking module. Instead, rest assured, positive and stay prompt within your reply. Never show your unwillingness if you are not thoroughly gotten ready for test. The minute you start out showing your reluctance, the examiner will tend to turn out the speaking test as soon as possible.

Body gestures is an additional but extremely important aspect to be considered. It matters a whole lot and raises the way you present yourself. While giving reaction to the interviewer’s questions, try using some gestures too. The usage of gestures is very useful as it makes you carry on speaking particularly if you obtain stuck while speaking. Additionally, this will likely enhance your confidence, possibly at one time prevent you making unnecessary pauses.

2. Keep your Fluency and Coherency:
What exactly is fluency? There’s a wrong perception among test takers that fluency ways to speak quickly. It’s not true. You must rather speak at the own comfortable pace, but be sure you speak neither too slow nor too fast. Producing unwanted sounds, stammering or stuttering and making long pauses can hamper your fluency. Coherency is another yet just about the most main reasons. This means that whatever you decide and speak should be well-connected and flow within a natural and sensible way. Remember that simply beating regarding the bush won’t ever ever earn you the desirable band score in speaking.

3. Maintain your Standard of English:
You must have an extraordinary command of the English language. Or else, you should start making preparations with this speaking module a minimum of a few months before. In the event you often make grammatical errors while speaking, you should revise the essential rules of English Grammar. Avoid making errors pertaining tenses, voice, modals, and narrations. Making silly errors specially in these areas could have a negative effect on your assessor. To help make your speaking far better, you can contribute good vocabulary words. Appropriate use of some idioms and phrasal verbs with full flexibility and precision in every topics can make good impression on the interviewer. However, you need to stay away from bombastic words if you’re not fully confident on the way to make use of them.

4. Pronunciation:
Pronouncing the words correctly has long been a herculean job for a lot of the non-native speakers unless they’ve got profound knowledge of phonetics and semantics. Many applicants belonging to non-English speaking countries often make an effort to imitate like native speakers with regards to speaking English. However, a lot of them simply prove to be a show-off inside the real IELTS exam in Karachi. Therefore, be neutral while speaking and be sure your mother tongue does not influence the way you speak English.

5. Final Points:
You may have a sigh of great relief if the interviews winds up the final part of the speaking module by saying, “That could be the end of the speaking test. Wish all of you the most effective for the future.” However, hearing these words, you should offer a prompt reply by saying, “Thank you a great deal. I really enjoyed Talking with you.” These words is sure to reflect you have not lost your interest on your speaking test. Additionally, you mustn’t express your band requirement for the examiner or start narrating the problems you encountered during the test. Be aware that the interviewer has not yet prepared your final evaluation report to date. So, after the test has ended, the thing left to do would be to leave the bedroom inside a quiet and relaxed way.
More details about IELTS institute in Karachi check this popular resource

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Which has a strong family belief in Lord Ganesha, this season ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to make a six foot Ganesha idol with automobile scraps.


An experienced professional in creating sculptors away from metal scrap, when a client approached Nishant to make certainly one of Lord Ganesha, he couldn’t resist. He believes his newborn baby girl can be an response to his prayers to Ganpati/ Ganesha, he believed this came as an chance to express the romance towards higher power.

Click the youtube url for that scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Regardless of the short notice, a task that will need a commitment of nearly 60 – 70 days, he completed this magnificent piece within a month. Tirelessly day time and night along with his team, he states “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts would have to be handpicked so they could easily fit in being a jigsaw puzzle. The most difficult and challenging part was the whole process of hammering and bending the various to get the desire model of our bodies. Sourcing flat parts from various vendors added to the process of executing the project in the deadline, which however we was able to accomplish.

A 6 ft . tall “The Lord Ganesha” sculpture, it can be made purely from various automobile scrap parts. These parts are nearly 10 to 15 mm in thickness that have been bent & welded together and meticulously shaped to really make it a complete metal sculpture. This Ganpati Idol has been created from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts only to mention a few. The Mooshak (Mouse/ Undir Mama) is also made from gears, nuts, bolts and in addition which has a piston block and a wrought iron tail.
With all the 6 foot Ganpati created away from automobile scrap for his client, the following work for Nishant is really a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Using a strong family belief in Lord Ganesha, this season ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to make a six foot Ganesha idol with automobile scraps.


A professional in creating sculptors out of metal scrap, each time a client approached Nishant to create among Lord Ganesha, he couldn’t resist. He believes his newborn baby girl is an answer to his prayers to Ganpati/ Ganesha, he believed this came just as one opportunity to express the love towards higher power.

Click on the youtube url for that scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Regardless of the short notice, an undertaking that will require a commitment of nearly 60 – 70 days, he completed this magnificent piece within a month. Tirelessly morning and night regarding his team, according to him “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts needed to be handpicked so that they could fit into like a jigsaw puzzle. The most difficult and challenging part was the process of hammering and bending several to give the desire model of your body. Sourcing flat parts from various vendors included with the challenge of executing the work at the deadline, which however we managed to accomplish.

A 6 feet tall “The Lord Ganesha” sculpture, it is made purely from various automobile scrap parts. These parts are nearly 10-15 mm in thickness that have been bent & welded together and meticulously shaped making it a whole metal sculpture. This Ganpati Idol has been created from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts simply to name just a few. The Mooshak (Mouse/ Undir Mama) is additionally made from gears, nuts, bolts and in addition which has a piston block along with a wrought iron tail.
With all the 6 foot Ganpati created from automobile scrap for his client, the subsequent problem for Nishant can be a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Which has a strong family belief in Lord Ganesha, in 2010 ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to generate a six foot Ganesha idol with automobile scraps.


An experienced professional in creating sculptors away from metal scrap, whenever a client approached Nishant to make among Lord Ganesha, he couldn’t resist. He believes his newborn little girl can be an response to his prayers to Ganpati/ Ganesha, he believed this came just as one chance to express his passion towards the higher power.

Click the youtube url for the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

In spite of the short notice, a task that will require a dedication of nearly 60 – 70 days, he completed this magnificent piece in a month. Tirelessly working day and night together with his team, according to him “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts needed to be handpicked so that they could easily fit into like a jigsaw puzzle. The most difficult and challenging part was the process of hammering and bending the various components to give the desire model of one’s body. Sourcing flat parts from various vendors added to task of executing the work with the deadline, which however we managed to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it can be made purely from various automobile scrap parts. These parts are nearly 10 to 15 mm in depth which are bent & welded together and meticulously shaped to make it an entire metal sculpture. This Ganpati Idol has been given from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts just to name some. The Mooshak (Mouse/ Undir Mama) can be made from gears, nuts, bolts as well as with a piston block as well as a wrought iron tail.
With the 6 foot Ganpati created away from automobile scrap for his client, the following work for Nishant is really a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Having a strong family belief in Lord Ganesha, this season ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to produce a six foot Ganesha idol with automobile scraps.


An experienced professional in creating sculptors from metal scrap, every time a client approached Nishant to produce certainly one of Lord Ganesha, he couldn’t resist. He believes his new born little girl is surely an response to his prayers to Ganpati/ Ganesha, he believed this came as a possible possiblity to express the love for the higher power.

Click on the youtube url for that scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Regardless of the short notice, a job that needs a commitment of nearly 60 – 70 days, he completed this magnificent piece inside a month. Tirelessly day time and night regarding his team, he states “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts needed to be handpicked in order that they could fit into as being a jigsaw puzzle. The most challenging and challenging part was the whole process of hammering and bending the parts to obtain the desire form of our bodies. Sourcing flat parts from various vendors combined with the challenge of executing the job on the deadline, which however we managed to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it’s made purely from various automobile scrap parts. These parts are nearly 10 to 15 mm thick that have been bent & welded together and meticulously shaped to make it a complete metal sculpture. This Ganpati Idol has been created from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts simply to mention a few. The Mooshak (Mouse/ Undir Mama) can also be produced from gears, nuts, bolts as well as having a piston block plus a wrought iron tail.
Using the 6 foot Ganpati created beyond automobile scrap for his client, the subsequent project for Nishant is often a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

With a strong family belief in Lord Ganesha, in 2010 ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to produce a six foot Ganesha idol with automobile scraps.


An expert in creating sculptors from metal scrap, every time a client approached Nishant to generate among Lord Ganesha, he couldn’t resist. He believes his newborn little girl is an reply to his prayers to Ganpati/ Ganesha, he believed this came being an possibility to express his love towards the higher power.

Click the youtube url to the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

In spite of the short notice, an undertaking that will need a commitment of nearly 60 – 70 days, he completed this magnificent piece in just a month. Tirelessly day time and night together with his team, he says “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts had to be handpicked so they really could easily fit into as being a jigsaw puzzle. The most challenging and challenging part was the entire process of hammering and bending several to obtain the desire form of the body. Sourcing flat parts from various vendors added to the process of executing the project at the deadline, which however we were able to accomplish.

A 6 feet tall “The Lord Ganesha” sculpture, it is made purely from various automobile scrap parts. These parts are nearly 10 to 15 mm in thickness which are bent & welded together and meticulously shaped to really make it a whole metal sculpture. This Ganpati Idol has been given from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts just to name some. The Mooshak (Mouse/ Undir Mama) is additionally made from gears, nuts, bolts and also having a piston block along with a wrought iron tail.
Using the 6 foot Ganpati created out of automobile scrap for his client, the subsequent task for Nishant can be a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Using a strong family belief in Lord Ganesha, this coming year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to generate a six foot Ganesha idol with automobile scraps.


A professional in creating sculptors away from metal scrap, whenever a client approached Nishant to produce among Lord Ganesha, he couldn’t resist. He believes his newborn little girl is surely an response to his prayers to Ganpati/ Ganesha, he believed this came being an possiblity to express his love towards the higher power.

Click on the youtube url to the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Despite the short notice, a project that requires dedication of nearly 60 – 70 days, he completed this magnificent piece in a month. Tirelessly day time and night with his team, he states “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts must be handpicked so they could fit in just like a jigsaw puzzle. The hardest and challenging part was the process of hammering and bending the various components to get the desire shape of one’s body. Sourcing flat parts from various vendors included with the challenge of executing the task at the deadline, which however we was able to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it’s made purely from various automobile scrap parts. These parts are almost 10-15 mm in thickness which were bent & welded together and meticulously shaped to really make it a complete metal sculpture. This Ganpati Idol has been created from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts just to name just a few. The Mooshak (Mouse/ Undir Mama) is additionally produced from gears, nuts, bolts plus which has a piston block along with a wrought iron tail.
With all the 6 foot Ganpati created from automobile scrap for his client, the following task for Nishant can be a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Using a strong family belief in Lord Ganesha, this season ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to make a six foot Ganesha idol with automobile scraps.


A professional in creating sculptors away from metal scrap, when a client approached Nishant to generate among Lord Ganesha, he couldn’t resist. He believes his newborn baby girl can be an reply to his prayers to Ganpati/ Ganesha, he believed this came as a possible possibility to express his love on the higher power.

Click the youtube url for that scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

In spite of the short notice, a project that will require dedication of nearly 60 – 70 days, he completed this magnificent piece in just a month. Tirelessly time of day and night along with his team, he admits that “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts needed to be handpicked so they could fit into just like a jigsaw puzzle. The most difficult and challenging part was the operation of hammering and bending the various to obtain the desire form of our bodies. Sourcing flat parts from various vendors included with task of executing the task on the deadline, which however we managed to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it’s made purely from various automobile scrap parts. These parts are nearly 10-15 mm in depth that have been bent & welded together and meticulously shaped making it a complete metal sculpture. This Ganpati Idol has been manufactured from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts simply to name just a few. The Mooshak (Mouse/ Undir Mama) is also made from gears, nuts, bolts plus using a piston block as well as a wrought iron tail.
With the 6 foot Ganpati created from automobile scrap for his client, another problem for Nishant can be a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

What to prepare for On your Home’s Roof Replacement Project

Replacing houses roof is a valuable part of looking after your home. A damaged or improperly maintained roof could cause thousands and dollars in damage to the rest of the property. Repairs only go up to now, and ultimately it will likely be time for you to replace houses roof entirely. Replacing houses roof can feel just like a daunting task for the 1st time homeowner. Choosing between a huge selection of professional roofing specialists might be confusing. Thankfully, the work to get a new roof just isn’t too complicated, also it really helps to understand what can be expected.


The first task in a roof replacement project is obtaining estimates deciding on a specialist. It’s a good idea to look into several companies. Ensure they’ve good reputations and are licensed in your city. Make sure to obtain estimates from the 3 major contractors before you sign a contract, as roofing estimates may have a wide range. There are many factors that may influence the expense of a roof covering replacement. It is good to know a bit on them before getting too involved.

The size and style and slope in the roof, the type of material being utilized, and the region of the united states can all modify the final cost of the work. A roof covering that is certainly particularly steep and slippery will definitely cost more to exchange than the usual roof that is certainly quicker accessible. The peak in the roof matters also. Roofs on two-story homes will set you back to exchange than roofs on ramblers or ranchers. Case as it’s easier for that workers gain access to a roof covering that is certainly better the soil. Also, like just about anything, prices vary based on where you live. Roof replacements be more pricey in places the place that the general cost of living is higher. How often of roof replacements differs with regards to the region in the county also. Roofs from the Midwest generally must be replaced more often than roofs in the rest of the united states on account of extreme weather. Likewise, homeowners in Socal replace their roofs more infrequently since weather conditions are usually mild year-round.

There are many different types of roofs you can have installed. The types of materials ranges in price from $1 to $40 or higher per square foot. The most common roofing material is asphalt shingles. They’re comparatively cheap and are usually bound to last anywhere between 20 and 30 years. They come in may different colors to compliment the outside of your house. Another kind of roofing is wood shake, which often costs $6 to $9 a square foot. These roofs are often manufactured from cedar and can last 12 to 25 years or so, nonetheless they require almost constant maintenance. Metal roofing for example copper or aluminum cost $15-$20 a square foot. Tile roofs, for example terra cotta, are generally found in southwestern architecture and expense $6 to $9 a square foot. (Tiles are not recommended in areas with frequent rainfall, while they tend to leak.) A slate roof is the most durable, although it can be the most expensive, and can cost as much as $40 a square foot ($120,000 to exchange a 3,000 square foot roof). Slate is normally applied to upscale homes and can last up to Two hundred years or higher with regards to the quality.

In addition to being inexpensive, asphalt shingles require little maintenance, causing them to be typically the most popular roofing choice for American homeowners. While asphalt shingle roofs will often be made to last 25 or 30 years, the specific expected life of your respective roof can vary based on where you live. High-speed winds, hurricanes, heavy storms, blizzards, and dramatic temperature fluctuations limit the longevity of houses roof. Estimates for replacing an asphalt shingled roof ranges from $1,500 to $9,000 with regards to the sized the roof along with location.

The expense of Cedar Shakes Omaha varies based on where you live. A roof covering replacement less expensive from the Midwest of computer does from the Northeast. In places the place that the general cost of living is higher, roof replacements will definitely cost more also. If you live in the Midwest, you need to replace houses roof more regularly. High-speed winds, tornadoes, blizzards, and ice storms will all wreak havoc on houses roof. Temperature fluctuations could also damage roofs. From the desert the temperature might be over 100 degrees throughout the day and drop to 50 or 40 degrees in the evening. 20-year asphalt shingles in Arizona and Boise state broncos last normally only 15 years, on account of sustained damage from temperature fluctuations. Homeowners in regions with mild weather could possibly get away with additional moderate roof repairs, creating full replacements longer amounts of time.
For more details about Cedar Shakes Omaha see this resource

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

With a strong family belief in Lord Ganesha, this season ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to produce a six foot Ganesha idol with automobile scraps.


A specialist in creating sculptors from metal scrap, every time a client approached Nishant to generate certainly one of Lord Ganesha, he couldn’t resist. He believes his baby daughter can be an reply to his prayers to Ganpati/ Ganesha, he believed this came as a possible opportunity to express his passion towards higher power.

Click the youtube url for that scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Inspite of the short notice, an undertaking that needs a commitment of nearly 60 – 70 days, he completed this magnificent piece inside a month. Tirelessly time of day and night with his team, he admits that “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts needed to be handpicked so they could easily fit into being a jigsaw puzzle. The hardest and challenging part was the whole process of hammering and bending several to give the desire form of one’s body. Sourcing flat parts from various vendors put into task of executing the work at the deadline, which however we been able to accomplish.

A 6 ft . tall “The Lord Ganesha” sculpture, it really is made purely from various automobile scrap parts. These parts are nearly 10 or 15 mm in depth which were bent & welded together and meticulously shaped to restore an entire metal sculpture. This Ganpati Idol has been made from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts in order to mention a few. The Mooshak (Mouse/ Undir Mama) is additionally made from gears, nuts, bolts and also using a piston block and a wrought iron tail.
Together with the 6 foot Ganpati created away from automobile scrap for his client, the subsequent task for Nishant is a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/